THE PROBLEM
In order to preserve the natural beauty of the stone materials used in the flooring it is necessary to limit the interaction of external pollutants with the material itself,through specific impregnation or finishing treatments.
The treatments used will have to ensure a high resistance, as they are called to resist stresses from the outside such as: direct sunlight, trampling, grease stains.
THE SOLUTION
The treatment of stone flooring is necessary in order to keep the physical and chromatic characteristics of the material unchanged over time. In interior flooring, proper treatment also facilitates daily maintenance,creating a surface that allows a proper use of rags and mops.
OUR PRODUCTS
INTERVENTION CYCLES
INTERIOR FLOORS – COMPACT STONE
1
Remove any previous treatments and proceed with an in-depth cleaning of the flooring.
INTERIOR FLOORS – POROUS STONE
1
Remove any previous treatments and proceed with an in-depth cleaning of the flooring.
EXTERIOR PAVINGS – WATER-REPELLENT TREATMENT
1
Remove any previous treatments and proceed with an in-depth cleaning of the flooring.
2
Apply IDRO BASE in two coats wet-on-wet
2 (alternatively)
To achieve a wet-look, apply CIR TONO PLUS in two coats 1 – 2 hours apart
EXTERIOR PAVINGS – ANTI-STAIN TREATMENT
1
Remove any previous treatments and proceed with an in-depth cleaning of the flooring.
2
Apply IMPRESTONE or IDRO PTA in two coats about 1 – 2 hours apart
3
To achieve a wet-look apply IMPRESTONE TONO or IDRO PTA TONO in two coats about 1 – 2 hours apart
CIR PRODUCTS STRONG POINTS
OUR TECHNICIAN RECOMMENDS
Before applying a finishing treatment on interior flooring it is recommended to always perform a water absorption test to assess the degree of absorption, so that you can choose the appropriate treatment.
